Luxeon Up & Down Dimmable Track Power Connector - Black

Description

DescriptionThis is the power connector for our Luxeon up & down magnetic track: the part that brings power into the rail. It comes as a compact kit in black, made up of two slim connector bodies with copper contacts, joined by a short black lead that runs through a grey and orange lever connector. The kit measures 225mm long, 48mm wide and 17mm high. You receive the connector only: the track and the track lights are sold separately, so plan them into the same order.
Wherever power is fed into the up & down track, you need one of these: the maker specifies one kit for each electrical input connection, so a run with a single feed point takes one kit and a run fed at two points takes two. That makes it a part worth counting at the planning stage rather than an optional extra. It suits anyone putting together a Luxeon up & down track scheme who wants the lights dimmed from a DALI or 1-10V control system, because it is built for DALI and 1-10V dimming. Checking that your controls use DALI or 1-10V before you order saves a second order once the track is on the ceiling.
The connector works with the track's 48V DC supply, and the maker rates each kit to a maximum of 210W, so total the wattage of the lights on each feed and keep it within that limit. Its copper contacts are set into both connector bodies, and the lever connector holds the two halves together as a single kit. As with any part of a lighting circuit, it should be installed by a qualified electrician. At 0.11KG and only 17mm high, it adds very little bulk to the run, which helps the finished track stay neat.
Specification

Length
225mm

Width
48mm

Height
17mm

Track Voltage
48V DC

Version
DALI & 1-10V dimmable

Use
1 kit for each electrical input connection

Finish
Black

Certification
CE

Weight
0.11KG

Warranty
5 Years

Frequently AskedHow many power connectors does my up & down track need?
The maker specifies one kit for each electrical input connection, so you need one connector for every point where power is fed into the track.
Does the power connector come with the track or the lights?
No. You receive the connector kit only. The up & down magnetic track and the track lights are both sold separately.
Which dimming systems does this connector work with?
This version is dimmable with DALI and 1-10V control, so it suits a Luxeon up & down track scheme run from either of those two systems.
What is the maximum load for one connector?
The maker rates each kit to a maximum of 210W, so keep the total wattage of the lights on each feed within that figure.
How big is the power connector?
It is 225mm long, 48mm wide and 17mm high, and it weighs 0.11KG, so it stays compact and adds little bulk to the track run.