Focus S Single Phase Track Spotlight - White

Description

Description
The Focus S is a single-phase track spotlight with a white powder-coated aluminium cylinder body mounted on a flat adapter that clips into unity track systems. The spotlight accepts a GU10 bulb up to 10W (sold separately) and

features a recessed lamp position that reduces glare by setting the bulb face deeper into the cylinder.

Designed for retail displays, gallery walls, kitchen worktops and living room accent lighting, the Focus S swivels 360° horizontally and tilts 90° vertically on ball-and-socket joints. This allows light to be directed onto wall art, merchandise, worksurfaces or architectural features without moving the track itself. The flat adapter integrates flush with single-phase track rails, creating a clean visual line when multiple spotlights are installed on the same run.

The white finish provides a neutral backdrop in modern and minimalist interiors where white ceilings and light-toned walls dominate. At 12.5cm tall and 5.2cm diameter, the cylinder remains compact enough for low-ceiling installations while maintaining sufficient depth to house the GU10 lamp and internal reflector. The aluminium construction keeps the unit lightweight at approximately 150g, reducing load on track installations spanning longer distances.

Specification

Height
12.5cm

Length
9.2cm

Diameter
5.2cm

Finish
White

Construction
Aluminium

IP Rating
IP20

Voltage
AC 220-240

Bulb Base
GU10

Wattage
10

Warranty
3 Year Guarantee

Downloads
Product Manual

Frequently Asked
What bulb does the Focus S take?

The spotlight accepts a standard GU10 bulb up to 10W maximum. Bulbs are sold separately. Most users pair this with a 5-7W LED GU10 in warm white (2700K-3000K) for accent lighting or neutral white (4000K) for task lighting in kitchens and workspaces.

Is it compatible with all track systems?

The Focus S uses a flat adapter designed for single-phase unity track systems. It will not fit three-circuit or proprietary track profiles. Check that your existing track is single-phase before ordering.

Can the spotlight angle be adjusted after installation?

Yes. The head swivels 360° horizontally and tilts 90° vertically on ball-and-socket joints, allowing you to redirect light onto different surfaces without detaching the spotlight from the track.

What is the IP20 rating?

IP20 means the spotlight is protected against objects larger than 12.5mm but not against moisture. It is suitable for dry indoor locations only and should not be used in bathrooms, kitchens directly above sinks, or outdoor environments.