Fevorne Ceiling Light - Black & Natural

Description

DescriptionThe Fevorne is a flush ceiling light that pairs a round black steel ceiling plate with a wide shade of twisted paper cord in a natural tan. The cords fan out from the plate and finish in a softly wavy edge, with a ring of cord circling the lower part of the shade, so the outline looks relaxed rather than rigid. It measures 39cm in diameter and stands 17.5cm high, and it takes an E27 bulb, which is not included. Rated IP20, it is made for indoor rooms that stay dry.
Because it sits close to the ceiling and is only 17.5cm high, it works well in rooms where a pendant would hang too low: a living room, a bedroom, a landing or a hallway. With a 39cm diameter, the shade has enough width to anchor the middle of a room without crowding it. The black and natural pairing sits comfortably with wood, linen, plants and pale walls, and it brings a warm, earthy texture to a plain ceiling. It suits anyone who wants the look of a natural cord shade on a fitting that stays neatly out of the way.
The ceiling plate is steel in black, and the shade is paper twisted into cord, and the whole light weighs just 0.57KG, a light load for a ceiling. There is no switch on the light itself; it is switched at the wall, so you turn it on and off from a wall switch. As a wired mains light, it should be installed by a qualified electrician, and the installation instructions are available as a download. Paper is best kept dry, so dust the shade gently with a soft, dry brush or cloth rather than wiping it with water. Remember to buy an E27 bulb before fitting day, as one is not included.
Specification

Body Material
Steel

Body Colour
Black

Shade Material
Paper

Shade Colour
Natural

IP Rating
IP20

Light Source
E27 (bulb not included)

Height
17.5cm

Diameter
39cm

Weight
0.57KG

Protection Class
Class I

Voltage
220-240V, 50/60Hz

Operating Voltage
220-240V, 50/60Hz

Switch
None (switched at the wall)

DownloadsInstallation Instructions (PDF)
Frequently AskedIs a bulb included with the Fevorne ceiling light?
No, the bulb is not included. The light takes an E27 bulb, so buy one separately to fit after installation.
Can I use this ceiling light in a bathroom?
No. It is rated IP20, so it is made for dry indoor rooms such as living rooms, bedrooms and hallways, never bathrooms, damp spaces or outdoors.
How large is the Fevorne ceiling light?
It is 39cm in diameter and 17.5cm high, so it sits close to the ceiling and suits rooms where a hanging pendant would feel too low.
What material is the shade?
The shade is paper twisted into cord, in a natural tan colour, fanning out from a black steel ceiling plate to a softly wavy edge.
Does the light have its own switch?
No, there is no switch on the light itself. It is switched at the wall, so you turn it on and off with a wall switch.
How do I clean the paper shade?
Paper is best kept dry, so dust the shade gently with a soft, dry brush or cloth and avoid water or spray cleaners.